subject
Physics, 02.04.2020 04:46 deb64

You are riding shotgun in a 2000 kg race car. The driver makes a sharp turn going 60 m/s which throws you into the door with a force of 6000 N. You have a mass of 60 kg. How tight was the turn, or in physics terms, what was the radius of the turn?

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 16:10, brendaesme
Avoltage source vs = 10 v is in series with a resistor of 10 kohm. if the source transformation theorem is applied, what will the value of the current source be in ma ?
Answers: 1
image
Physics, 22.06.2019 00:20, pooperjooper
Aparticle of mass m is projected with an initial velocity v0 in a direction making an angle α with the horizontal level ground as shown in the figure. the motion of the particle occurs under a uniform gravitational field g pointing downward. (a) write down the lagrangian of the system by using the cartesian coordinates (x, y). (b) is there any cyclic coordinate(s). if so, interpret it (them) physically. (c) find the euler-lagrange equations. find at least one constant of motion. (d) solve the differential equation in part (c) and obtain x and y coordinates of the projectile as a function of time. (e) construct the hamiltonian of the system, h, and write down the hamilton’s equations (canonical equations) of motion.
Answers: 2
image
Physics, 22.06.2019 00:30, sophiaa23
Next a skier is pulled by a tow rope up a frictionless ski slope that makes an angle of 15 with the horizontal. the rope moves parallel to the slope with a constant speed of 0.69 m/s. the force of the rope does 800 3 of work on the skier as the skier moves a distance of 8.4 m up the incline. (a) if the rope moved with a constant speed of 2.2 m/s how much work would the force of the rope do on the skier as the skler moved a distance of 8.4 m up the incline? at what rate is the force of the rope doing work on the skier when the rope moves with a speed of (b) 0.69 m/s and (c) 2.2 m/s?
Answers: 1
image
Physics, 22.06.2019 05:10, zionnahl
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
You know the right answer?
You are riding shotgun in a 2000 kg race car. The driver makes a sharp turn going 60 m/s which throw...

Questions in other subjects:

Konu
Mathematics, 05.02.2021 21:10
Konu
History, 05.02.2021 21:10