You construct a circuit containing some component C, along with other circuit elements. You want to simultaneously measure the current through C and the voltage across C while it remains connected to the rest of the circuit. Indicate where you would connect an ammeter (A) and a voltmeter (V) to perform these measurements. Fill any remaining gaps with wires as needed to complete the connection with the rest of the circuit.

The position of the ammeter is in series down the component. While the voltmeter must be connected in parallel. Its position is the gap through the component C.

The positions of one or the other are indicated in the image.

Explanation:

An ammeter is defined as a device used to measure current. Its unit is the ampere. While a voltmeter is used in the measurement of the potential difference between two points. Its unit is the volt. The ammeter must be connected in series with the point at which the current is to be measured, while the voltmeter must be connected in parallel.

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

watch you tube or play clash royale, mainly clash royale