subject
Physics, 26.03.2020 18:59 darajeanty2004p7cu4m

The boundary-layer thickness, δ, on a smooth flat plate in an incompressible flow without pressure gradients depends on the freestream speed, U, the fluid density, rho, the fluid viscosity, μ, and the distance from the leading edge of the plate, x. (a) Express these variables in dimensionless form and (b) calculate dimensionless parameter (proportional to x) with x = 0.142 m, rho = 225 kg/m3, U = 0.133 m/s, μ = 0.2 × 10-4 N-s/m2

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 10:30, Fire8615
In automobile steering wheel is shown what is the ideal mechanical advantage blank? if the ama is eight what is the efficiency of the steering wheel?
Answers: 1
image
Physics, 22.06.2019 15:50, micahsocool23
The space between two 15-in.-long concentric cylinders is filled with glycerin (viscosity = 8.5 × 10-3 lb·s/ft2). the inner cylinder has a radius of 1 in. and the gap width between cylinders is 0.1 in. determine (a) the torque and (b) the power required to rotate the inner cylinder at 180 rev/min. the outer cylinder is fixed. assume the velocity distribution in the gap to be linear.
Answers: 2
image
Physics, 22.06.2019 21:30, missy9225
A1500 w electric heater is plugged into the outlet of a 120 v circuit that has a 20 a circuit breaker. you plug an electric hair dryer into the same outlet. the hair dryer has power settings of 600 w, 900 w , 1200 w, and 1500 w. you start with the hair dryer on the 600 w setting and increase the power setting until the circuit breaker trips. under what setting does the circuit breaker trip.
Answers: 2
image
Physics, 22.06.2019 23:30, elizabethhubbe
Which statement correctly describes the interaction between magnetic poles? north and south poles attract each other. north and south poles repel each other. two north poles will attract each other. two south poles will attract each other.
Answers: 1
You know the right answer?
The boundary-layer thickness, δ, on a smooth flat plate in an incompressible flow without pressure g...

Questions in other subjects: