In 1656, the Burgmeister (mayor) of the town of Magdeburg, Germany, Otto Von Guericke, carried out a dramatic demonstration of the effect resulting from evacuating air from a container. It is the basis for this problem. Two steel hemispheres of radius 0.400 m (1.31 feet) with a rubber seal in between are placed together and air pumped out so that the pressure inside is 12.00 millibar. The atmospheric pressure outside is 940 millibar. Calculate the force required to pull the two hemispheres apart.

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.

You have been consulted by the mobile phone company hookup about a new augmented reality product called “brows”. they want to develop an alternative to google glasses, which, you recall, is a proposed new product which plans to superimpose a whole range of wireless google services over the user’s ordinary vision of the world. these appear in little circles and ovals, and let you phone people, take photographs, navigate across cities and inside buildings, find shops and update your social media. brows would do this too, but not be limited to special google services. the user would wear a small cylinder-shaped device designed to fit on top of their existing eyewear (glasses or sunglasses). it would project a reversed image onto the inside of the lenses, the reflection of which would be in focus for the user. instead of voice control, the user would control the device by eye and neck movements, which the device would track. the device would connect via bluetooth to the user’s phone, which would supply most of the computing power and wireless connectivity. hookup also wants to know what existing services would be most in demand, and which would not work well with brows. using your knowledge of augmented reality, wearable technology and interface design, is the project feasible? if not, why not? if feasible, how could the product need to be modified for a better experience?

What causes the formation of ocean currents?