Physics, 18.03.2020 23:15 ltay92

In a series circuit, a generator (1300 Hz, 12.0 V) is connected to a 14.0- resistor, a 4.40-μF capacitor, and a 6.00-mH inductor. Find the voltages across (a) the resistor, (b) the capacitor, and (c) the inductor. Note: The ac current and voltage are rms values and power is an average value unless indicated otherwise.

Answers: 1

Show answers

Answers

Answer from: greciakawaii

(a) 2.8 V

(b) 5.6 V

Explanation:

Given:

Frequency of the generator (f) = 1300 Hz)

Terminal voltage (V) =12.0 V

Resistance of resistor (R) = 14.0 Ω

Capacitance of capacitor (C) = 4.40 μF = 4.40 × 10⁻⁶ F

Inductance of the inductor (L) = 6.00 mH = 6.00 × 10⁻³ H

In order to find the voltages across each, we first need to find the reactance and impedance.

Reactance of the inductor is given as:

$X_L=2\pi f L\\\\X_L=2\times 3.14\times 1300\times 6.00\times 10^{-3}\\\\X_L=49\ \Omega$

Reactance of the capacitor is given as:

$X_C=\frac{1}{2\pi fC}\\\\X_C=\frac{1}{2\times 3.14\times 1300\times 4.40\times 10^{-6}}\\\\X_C =28\ \Omega$

Now, impedance is given as:

$Z=\sqrt{X_L^2+X_C^2}\\\\Z=\sqrt{(49)^2+(28)^2}\\\\Z=\sqrt{3185}=56.4\ \Omega$

Current across the circuit is given as:

$I=\frac{V}{Z}\\\\I=\frac{12}{56.4}=0.2\ A$

As resistor, capacitor and inductor are connected in series, the current across each of them is same and equal to total current in the circuit.

(a)

Voltage across the resistor is given as:

$V_R=IR\\\\V_R=0.2\times 14=2.8\ V$

Therefore, the voltage across resistor is 2.8 V.

(b)

Voltage across the capacitor is given as:

$V_C=IX_C\\\\V_C=0.2\times 28=5.6\ V$

Therefore, the voltage across the capacitor is 5.6 V.

(c)

Voltage across the inductor is given as:

$V_L=IX_L\\\\V_L=0.2\times 49=9.8\ V$

Therefore, the voltage across the inductor is 9.8 V.

Answer from: Quest

Rain is pulled by gravity which is a non contact force

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia