A 2.00-nF parallel-plate capacitor is charged to an initial potential
difference AV}: 100 V and is then isolated. The dielectric material
between the plates is mica, with a dielectric constant of 5.00. (a) How
much work is required to withdraw the mica sheet? (b) What is the
potential difference across the capacitor after the mica is withdrawn?

The answer to the question is;

(a) The amount of work required to withdraw the mica sheet is 4.0×10⁻⁵ J

(b) The potential difference across the capacitor after the mica is withdrawn is 500 V.

Explanation:

To solve the question, we note that

The Capacitance of the capacitor is proportional to the dielectric constant, that is removal of the dielectric material will reduce the capacitance of the capacitor by a factor of the dielectric constant as follows

Energy stored in a capacitor is given by

Where:

C = Capacitance of the capacitor = 2.00 nF

V = Voltage = 100 V

Therefore before the dielectric material is removed, we have

E = ×2.00 × 10⁻⁹×100² = 1.0×10⁻⁵ J

Asfter the dielectric material is removed we have

E = 5× ×2.00 × 10⁻⁹×100² = 5.0×10⁻⁵ J

Since energy is neither created nor destroyed, we have

Change in energy of system  = 5.0×10⁻⁵ J - 1.0×10⁻⁵ J = 4.0×10⁻⁵ J

Work done on the system to remove the mica sheet = energy change of the system = 4.0×10⁻⁵ J.

(b) From the equation

Where

Q = Charge of the capacitor

V= Voltage

C = Capacitance of the capacitor, we have

Q, the charge of the capacitor is constant

and the final capacitance =

Therefore we have

V₁ =

V₂ = = = 5·V₁

The velocity increases by a factor of 5 and

V₂ = 5×V₁ =  5 × 100 V = 500 V.

  distance on the y-axis and time on the x-axis.

explanation:

the instantaneous velocity = change in position/time taken

the slope of the graph should give instantaneous velocity.

  slope of a graph = change in value of y -axis / change in values of x -axis

  comparing both the equations

    change in value of y -axis = change in position

  change in values of x -axis = time taken

so position values should be on the y axis and time values should be on the x axis.

distance on the y-axis and time on the x-axis.