subject
Physics, 11.03.2020 23:16 SapphireWolf

When a resistor is connected across the terminals of an ac generator (113 V) that has a fixed frequency, there is a current of 0.324 A in the resistor. When an inductor is connected across the terminals of the same generator, there is a current of 0.461 A in the inductor. When both the resistor and the inductor are connected in series between the terminals of this generator, what is (a) the impedance of the series combination and (b) the phase angle between the current and the voltage of the generator

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 06:00, jagmeetcheema
The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒
Answers: 3
image
Physics, 22.06.2019 07:30, jaquezdaking4919
The slope of a velocity time graph over any interval of time gives the during that interval
Answers: 2
image
Physics, 22.06.2019 15:00, tanaemichel
Sodium chloride, nacl, is formed when a sodium atom transfers its electron to a chlorine atom. the difference in charge between the two atoms creates a(n) attraction that bonds them together.
Answers: 1
image
Physics, 22.06.2019 15:00, Fetty1738
What pressure difference is required between the ends of a 2.0-m-long, 1.0-mm-diameter horizontal tube for 40 c water to flow through it at an average speed of 4.0 m/s?
Answers: 1
You know the right answer?
When a resistor is connected across the terminals of an ac generator (113 V) that has a fixed freque...

Questions in other subjects: