subject
Physics, 10.03.2020 22:33 qveenvslayin

For the following application, identify one or more nontraditional machining processes that might be used, and present arguments to support your selection. Assume that either the part geometry or the work material (or both) preclude the use of conventional machining

a. Producing a through-hole in the shape of "L" in a 12.5 mm thick plate of ceramic materials. The size of the "L" is 15 by 10 mm and the width of the hole is 3 mm.
b. Producing a blind-hole in the shape of the letter S in a 30 mm cube of platinum. The overall size of the "S" is 10 by 6 mm, the depth of the hole is 3.8 mm, and its width is 3 mm.
c. Producing a matrix of 0.1 mm diameter holes in a Nickel plate of 3.2 mm thick. The matrix is rectangular, 75 by 125 mm with the separation between holes in each direction 1.6 mm
d. Cutting of flat sheets of fiber-glass for boat industry. The work team supervisor says the company should invest in a plasma arc cutting machine, what do you think? Justify your answer by indicating the characteristics of the process that make PAC attractive or unattractive in this application.
e. A company that manufacturing airplane parts must cut large quantities of matrices composites. Many of these parts are strong and wear-resistant, which properties make them difficult to cut. What nontraditional process(es) would you recommend to the company for this application? Justify your answer by indicating the characteristics of the process that make it attractive.

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 08:00, cxttiemsp021
Choose each of the settings that follow and list them below do it ill mark brainliest first object= position= speed= acceleration= second object= position= speed= acceleration=
Answers: 2
image
Physics, 22.06.2019 10:00, amyaacrawford86
Because air contracts as it cools, the air pressure inside a freezer is typically lower than on the outside. why do ice cubes inside a freezer tend to shrink over time? a. the ice dissolves oxygen from the air, forming a denser crystalline matrix. b. the ice reacts chemically with carbon dioxide in the air, forming gaseous carbon compounds. c. the ice melts, and then the liquid freezes as ice crystals on the bottom of the freezer. d. the ice sublimes, and then the water vapor deposits as ice crystals on the sides of the freezer.
Answers: 1
image
Physics, 22.06.2019 10:00, autumnskye1
In a heat engine if 1000 j of heat enters the system the piston does 500 j of work, what is the final internal energy of the system if the initial energy was 2000 j? 1. write the equation 2.list out your known variables 3.plug the numbers into the equations 4.solve 5.write your solution statement that includes initial energy and final
Answers: 3
image
Physics, 22.06.2019 10:30, markfaerman5408
Carbon is allowed to diffuse through a steel plate 15 mm thick. the concentrations of carbon at the two faces are 0.65 and 0.30 kg c/m^3 fe, which are maintained constant. if the preexponential and activation energy are 6.2 x 10-7 m2 /s and 80,000 j/mol, respectively, compute the temperature at which the diffusion flux is 1.43 x 10^-9 kg/m^2 -s.
Answers: 3
You know the right answer?
For the following application, identify one or more nontraditional machining processes that might be...

Questions in other subjects:

Konu
Mathematics, 21.11.2019 01:31
Konu
Mathematics, 21.11.2019 01:31