Physics, 10.03.2020 09:02 mrashrafkotkaat

A bimetallic strip, consisting of metal G on the top and
metal H on the bottom, is rigidly attached to a wall at the left. The coefficient of linear
thermal expansion for metal G is less than that of metal H. If the strip is uniformly
heated, it will

Answers: 1

Show answers

Answers

Answer from: Soloaa

The length of metal H will increase more than the length of metal G.

The given problem is based on the concept of thermal expansion. When a certain metal is heated, its length increases according to the thermal expansion equation,

$\dfrac{\Delta L}{L}= \alpha \times \Delta T$

Here, $\Delta L$ and $\Delta T$ are the change in length and change in temperature respectively and L is the original length. And $\alpha$ is the thermal expansion coefficient.

Therefore, we see that the larger the coefficient of linear expansion, the more the metal length increases.

Here we have two metals, G on the top of the strip and H on the bottom, and the coefficient of thermal expansion for metal G is less than that of metal H. So this means that as the strip is heated, the length of metal H (on the bottom) will increase more than the length of metal G (on top): and therefore, the strip will bend towards the top (with metal G in the inside of the curve, while metal H on the outside).

Thus, we can conclude that the length of metal H will increase more than the length of metal G.

Learn more about the thermal expansion here:

link

Answer from: mjam85877

The strip will bend towards the top

Explanation:

When a certain metal is heated, its length increases according to the equation

$\frac{\Delta L}{L}=\alpha \Delta T$

where

$\Delta L$ is the increase in length

L is the initial length

$\alpha$ is the coefficient of linear expansion

$\Delta T$ is the change in temperature

Therefore, we see that the larger the coefficient of linear expansion, the more the metal length increases.

Here we have two metals, G on the top of the strip and H on the bottom, and the coefficient of thermal expansion for metal G is less than that of metal H, so

$\alpha_G$

This means that as the strip is heated, the length of metal H (on the bottom) will increase more than the length of metal G (on top): and therefore, the strip will bend towards the top (with metal G in the inside of the curve, while metal H on the outside).

Answer from: Quest

answer: he got 23

explanation:

Answer from: Quest

the part of the wave he is travelling on is the crest

Other questions on the subject: Physics

Physics, 22.06.2019 02:00, Needalittlehelp

Figure 9 on page 362 shows various motions of balls. the curved path followed by the yellow ball in b in picture b is result of a) inertia b) centripetal motion c) gravity and horizontal velocity d) linear motion

Answers: 3

continue

Physics, 22.06.2019 03:30, ashah1260

Starting with only the balmer series light (visible light), how could we ensure that the solar panels generate a current that mark can use for his power station? a)by gradually increasing the brightness (amount) of light that we shine on it. b)by gradually increasing the frequency of the light we shine on it. c)by gradually increasing the wavelength of the light that we shine on it.

Answers: 3

continue

Physics, 22.06.2019 06:30, bradleydb222

5submission this assignment is worth 20 points total. you are required to submit the following by next lab: 1. (3 points) determine the equation for the output angular velocity ω2 = θ˙ 2 as a function of θ1, ω1 = θ˙ 1 and α. you must show all your work to receive credit. 2. (2 points) use the result of problem#1 to plot ω2 over 0 ≤ θ1 ≤ 360deg with ω1 = 360deg/sec. do this for α = {10,30}deg. show the results on the same plot and properly label the axes, title, legend. for this you can use matlab or ms excel. 3. (3 points) determine the equation for the output angular acceleration ω˙ 2 and create a plot similar to the one in problem#2. 4. (10 points) submit plots of the results (ω2 and ω˙ 2) obtained from creo/mechanism and compare them to results of problem#2 and problem#3. note that you should do these comparisons for the two cases with α = {10,30}deg. 5. (2 points) provide a brief explanation of the results. did they match? what are the implications as misalignment angle increases?

Answers: 3

continue

Physics, 22.06.2019 22:00, crystalclear99

Agirl throws a ball. if the ball's acceleration is 12 m/sec/sec and its mass is 0.5 kg, how much force did the girl apply to the ball?

Answers: 1

continue

You know the right answer?

A bimetallic strip, consisting of metal G on the top and
metal H on the bottom, is rigidly att...