A 1.0-in.-diameter hole is drilled on the centerline of a long, flat steel bar that is 1 2 thick and 4 in. wide. The bar is subjected to a tensile load of 30,000 lb. Calculate the average stress in the plane of the reduced cross section and the maximum tensile stress immediately adjacent to the hole.

The answers are

The average stress = 20000 lb/in²

The maximum tensile stress immediately adjacent to the hole

= 31076.92 lb/in²

Explanation:

To solve the question we have

Weight of tensile load = 30,000 lb

Width of steel bar = 4 in

Thickness of steel bar = 1/2 in

Average Stress = Force/Area  

Size of hole drilled = 1.0 in diameter

Available width at cross section where the 1.00 in diameter hole is drilled =

(4 - 1) in = 3 inches

Cross sectional area at the point of reduced cross section due to the drilled hole = Width × Thickness (Since the item is a flat bar)

= 3 in × 1/2 in = 1.5 in²

Therefore Stress = (30000 lb)/(1.5 in²) = 20000 lb/in²

the maximum tensile stress immediately adjacent to the hole.

Bending stress = where

0.5*30000/I = 11076.92 lb/in²

Max stress = 31076.92 lb/in²

answer: (431,2)

step-by-step explanation:

hi,

what occurs during a solar eclipse?

there are small tides across earth.

the moon is between earth and the sun.

p.s. im not sure if the first answer is correct because during a solar ecliphse there are spring tides and i dont know if they are the same.