This problem has been solved!
See the answer
A typical nuclear reactor generates 1,000 MW (1,000 MJ/s) of electrical energy. In doing so, it produces 2,000 MW of "waste heat" that must be removed from the reactor to keep it from melting down. Many reactors are sited next to large bodies of water so that they can use the water for cooling. Consider a reactor where the intake water is at 18° C. State regulations limit the temperature of the output water to 30° C so as to not harm aquatic organisms. How many liters of cooling water have to be pumped through the reactor each minute?

There have to be pumped 100,646 liters of cooling water through the reactor each minute.

Explanation:

In a minute, the reactor produces 2,000MW*60s=120,000MJ of heat. We use the formula

Where is the transferred heat, is the mass of the water used, is the specific heat of water (C=4.1813 J/g°K) and is the change in temperature of the water.

If we solve for we get:

But we need the volume of the water, not its mass. So we have to use the concept of density. Density is equal to

So,

We put this in the other equation, and get:

Before we plug in the known values in the formula, we have to convert them to the correct units:

Finally, we calculate the volume of water:

So, there have to be pumped 100,646 liters of cooling water through the reactor each minute.

answer is slate

hope this

the speed of the cart after 3 seconds of low fan speed is ⇒ 54.0 cm/s.

the speed of the cart after 5 seconds of medium fan speed is ⇒ 120.0 cm/s.

the speed of the cart after 2 seconds of high fan speed is ⇒ 64.0 cm/s. 

just did the lab.