An AISI 1030 hot rolled steel bar has a diameter of 1.5in. For unknown factors including the reliability factor, set equal to 1.Estimate the: a. Endurance limit (Se’)b. Corrected endurance limit in bending and rotation (Se). Assume that there is no axial loading. Assume that component is used at room temperature. Assume that a 50% reliability that the endurance strength of your material is within 8% of the mean value reported is acceptable. c. Corrected endurance limit for reverse bending without rotation (Se). Assume that there is no axial loading. Assume that component is used at room temperature. Assume that a 50% reliability that the endurance strength of your material is within 8% of the mean value reported is acceptable. Note: the size factor will change compared to previous question
Answers: 1
Other questions on the subject: Physics
Physics, 22.06.2019 06:30, 1234fatimasm
What are similarities and differences between refraction, reflection, diffraction and absorption?
Answers: 3
Physics, 22.06.2019 10:50, afonseca73
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
Physics, 22.06.2019 15:00, annapittbull12
When is a current produced? when the terminals of an electrochemical cell are connected by a wire if the electric circuit is opened in an electrochemical cell if the electrolyte is removed from an electrochemical cell when the electrodes are reversed in an electrochemical cell
Answers: 1
Physics, 22.06.2019 22:10, shimmerandshine1
Astep up transformer has 250 turns on its primary and 500 turns on it secondary. when the primary is connected to a 200 v and the secondary is connected to a floodlight that draws 5a, what is the power output? show all of your work.
Answers: 1
You know the right answer?
An AISI 1030 hot rolled steel bar has a diameter of 1.5in. For unknown factors including the reliabi...
Questions in other subjects:
Chemistry, 11.10.2019 17:10
History, 11.10.2019 17:20
