A distance of 200 ft must be taped in a manner to ensure a standard deviation smaller than ± 0.04 ft. What must be the standard deviation per 100 ft tape length to achieve the desired precision?Express your answer to three significant figures and include appropriate units.

The error in tapping is ±0.02828 ft.

Explanation:

Given that,

Distance = 200 ft

Standard deviation = ±0.04 ft

Length = 100 ft

We need to calculate the number of observation

Using formula of number of observation

Put the value into the formula

We need to calculate the error in tapping

Using formula of error

Put the value into the formula

Hence, The error in tapping is ±0.02828 ft.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: