subject
Physics, 19.02.2020 21:30 haylee1468

A wireless bridge is configured to transmit at 100mW. The antenna cable and connectors produce a 3 dB loss and are connected to a 16 dBi antenna. What is the EIRP?

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:30, 1031kylepoe03
Acoil formed by wrapping 80 turns of wire in the shape of a square is positioned in a magnetic field so that the normal to the plane of the coil makes an angle of 28.0° with the direction of the field. when the magnetic field is increased uniformly from 200 µt to 600 µt in 0.400 as, an emf of magnitude 80.0 mv is induced in the coil. what is the total length of the wire?
Answers: 3
image
Physics, 22.06.2019 04:00, binodkharal2048
Which configuration would produce an electric current? a) rotate a coil of copper wire between two magnets. b) connect a wire between a copper and zinc strip sitting in a beaker of water. c) connect a wire to the (+) positive end of a battery and the other end to a light bulb. d) connect a wire to the negative end of a battery and the other end to a light bulb.
Answers: 2
image
Physics, 23.06.2019 09:00, lindasuebairdoyjpf7
Momentum lab this lab uses a phet simulation. navigate to the phet momentum simulation. if you don’t see the image below when you click on the link, then you need to either enable adobe flash (click on the puzzle piece on your screen) or you need to install adobe flash (this is a free program). change the vectors to be momentum vectors only. they are yellow. make the mass of both balls the same. hit play and notice what happens to the momentum vectors before and after the collision. you might want to play the sim multiple times. click on restart or return balls to start over. to see numbers, check the show values box (inside the green box). red’s momentum vector before the collision is green’s momentum vector after the collision. question 1 options: shorter than longer than equal to question 2 (1 point) saved since green bounces off red, this must be an collision. question 2 options: explosion inelastic elastic question 3 (1 point) red transfers of its momentum to green during the collision. question 3 options: little all most none question 4 (4 points) why does red transfer all its momentum to green? back up your answer with information from the simulation. write at least 2 sentences.
Answers: 1
image
Physics, 23.06.2019 10:40, puzzledprincess8037
4.at 0 ºc, some amount of energy is required to change 1 kg of water from a solid into a liquid. if you had a 2 kg piece of ice, what effect would this have on the amount of thermal energy required to change the water from a solid to a liquid? it would require more energy to change solid water into liquid water because there are more molecules in this larger piece of ice. it would still require the same amount of energy to change solid water into liquid water because the entire piece of ice would still gain the same amount of energy in each case. it would require energy to be removed from the 2 kg piece of ice. the larger piece of ice already has more total energy than the smaller piece of ice, so energy must be removed for the ice to become liquid. it would require less energy to change solid water into liquid water because the energy would spread through the ice more quickly and the ice already has a larger total amount of energy because it is larger than a 1 kg piece of ice.
Answers: 1
You know the right answer?
A wireless bridge is configured to transmit at 100mW. The antenna cable and connectors produce a 3 d...

Questions in other subjects:

Konu
Mathematics, 08.11.2019 16:31