subject
Physics, 18.02.2020 02:00 lolweapon

At the beginning of the simulation the temperature should be at 4800 Kelvin. Notice that the peak of the curve is somewhere in the yellow-green region. Move the slider so that the temperature in the thermometer is where it says "light bulb".

a. At what temperature does this occur?
b. What color is emitted most strongly by a light bulb at this temperature? You may have to adjust the vertical axis so that the curve is easier to see.

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 17:20, buiratsamah
You have been called to testify as an expert witness in a trial involving a head-on collision. car a weighs 1515 lb and was traveling eastward. car b weighs 1125 lb and was traveling westward at 44.0 mph. the cars locked bumpers and slid eastward with their wheels locked for 22.5 ft before stopping. you have measured the coefficient of kinetic friction between the tires and the pavement to be 0.750 . how fast (in miles per hour) was car a traveling just before the collision? (this problem uses english units because they would be used in a u. s. legal proceeding.)
Answers: 3
image
Physics, 22.06.2019 06:00, pinkyglitter2696
What are atoms of the same element with varying number of neutrons
Answers: 3
image
Physics, 22.06.2019 10:30, gyexisromero10
Air is to be preheated by hot exhaust gases in a cross-flow heat exchanger before it enters the furnace. air enters the heat exchanger at 95 kpa and 20°c at a rate of 0.6 m^3/s. the combustion gases (cp = 1.10 kj/kg°c) enter at 160°c at a rate of 0.95 kg/s and leave at 95°c. determine the rate of heat transfer to the air and its outlet temperature.
Answers: 2
image
Physics, 22.06.2019 10:30, markfaerman5408
Carbon is allowed to diffuse through a steel plate 15 mm thick. the concentrations of carbon at the two faces are 0.65 and 0.30 kg c/m^3 fe, which are maintained constant. if the preexponential and activation energy are 6.2 x 10-7 m2 /s and 80,000 j/mol, respectively, compute the temperature at which the diffusion flux is 1.43 x 10^-9 kg/m^2 -s.
Answers: 3
You know the right answer?
At the beginning of the simulation the temperature should be at 4800 Kelvin. Notice that the peak of...

Questions in other subjects:

Konu
Physics, 10.10.2019 13:30