subject
Physics, 17.02.2020 22:06 Redeyestudio53

Suppose that you are going to program a computer to carry out an iterative calculation of motion involving nonconstant forces. Which of the following calculations should be done before starting the repetitive "loop" calculations?(A) Define constants such as 14πε0. (B) Update the (vector) position of each object.(C) Calculate the (vector) forces acting on the objects. (D) Specify the initial (vector) momentum of each object.(E) Specify an appropriate value for the time step.(F) Specify the mass of each object.(G) Update the (vector) momentum of each object.

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, moneybaggzay123
1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?
Answers: 2
image
Physics, 21.06.2019 23:30, reggiegilbert1995
Which simple machine is not part of this compound machine? a. lever b. pulley c. inclined plane d. wheel and axle
Answers: 1
image
Physics, 22.06.2019 07:30, amakayla57
Automobile fuel efficiency is often measured in miles that the car can be driven per gallon of fuel (mpg). heavier cars tend to have lower fuel efficiencies (lower mpg ratings). which variable (weight or fuel efficiency) is most naturally considered the explanatory (predictor) variable in this context?
Answers: 3
image
Physics, 22.06.2019 21:40, iancuteodora30
Ahair dryer is basically a duct in which a few layers of electric resistors are placed. a small fan pulls the air in and forces it through the resistors where it is heated. air enters a 1200 w hair dryer at 100 kpa and 22°c and leaves at 47°c. the cross-sectional area of the hair dryer at the exit is 60 cm2. neglecting the power consumed by the fan and the heat losses through the walls of the hair dryer, determine (a) the volume flow rate of air at the inlet and (b) the velocity of the air at the exit.
Answers: 1
You know the right answer?
Suppose that you are going to program a computer to carry out an iterative calculation of motion inv...

Questions in other subjects:

Konu
English, 20.09.2020 04:01
Konu
Mathematics, 20.09.2020 04:01
Konu
Chemistry, 20.09.2020 04:01