Two bulbs are connected in parallel across a source of EMF = 8.0V with a negligible internal resistance. One bulb has a resistance of 3.0Ω , and the other is 2.5Ω . A resistor R is connected in the circuit in series with the two bulbs.
(a) What value of R should be chosen in order to supply each bulb with a voltage of 2.4 V?
(b) For what value of R would the potential difference across each of the bulbs be 2.4 V?

(a) 3.18Ω

(b) 3.18Ω

Let the two bulbs be A and B

Given;

= Resistance in bulb A = 3.0Ω

= Resistance in bulb B = 2.5Ω

Since the two bulbs are connected in parallel;

i. their effective resistance () is given by

= +  ---------------(i)

Substitute the values of and into equation (i)

=> = +

Solve for  

= 1.36Ω

ii. voltage (potential difference), V, across them is the same;

Therefore we can get the total current (I) that will flow through them if the voltage to be supplied is 2.4V.

Use the Ohm's law;

V = I x R    -----------------(ii)

Where;

V = voltage across them = 2.4V

I = total current flowing through them

R = their effective resistance = = 1.36Ω

Substitute these values into equation (ii) as follows;

2.4  = I x 1.36

I = 2.4 / 1.36

I = 1.76A

(a) Now get the value of R

Since the voltage across the two bulbs is 2.4V out of the 8.0V supplied by the source, then the remaining (8.0 - 2.4 = 5.6)V will pass across the resistor R.

Also, since the two bulbs make a series connection with the resistor R, the same total current (I = 1.76A) that flows through these bulbs will flow through the resistor R.

Therefore, to get the value of R, we use the relation

V = I x R   ------------------------------(iii)

Where;

V = voltage across the resistor = 5.6V

I = current through the resistor = 1.76A

Substitute these values into equation (iii)

=> 5.6 = 1.76 x R

=> R  = 5.6 / 1.76

=> R = 3.18Ω

Therefore, the value of R to be chosen in order to supply each bulb with a voltage of 2.4V is 3.18Ω

(b) The potential difference and voltage across refer to the same thing. Therefore, the value of R that would make the potential difference across each of the bulbs be 2.4V is the same as the one calculated in (a) which is 3.18Ω

radiation warms things up temp rises convection currents air circ windy weather

magnified images possible images can be real = projected onto a screen