Ariver flows due south with a speed of 2.10 m/s. a man steers a motorboat across the river; his velocity relative to the water is 4.50 m/s. the river is 600 m wide.

1. in what direction should the motorboat head in order to reach a point on the opposite bank directly east from the starting point? (the boat's speed relative to the water remains 4.50) answer needs to be in degrees north of east.

2. what is the velocity of the boat relative to the earth? m/s is the units (the book says the answer is 3.98 m/s

3. how much time is required to cross the river? s (sec) is the units ( the book says the answer is 151 s)

5submission this assignment is worth 20 points total. you are required to submit the following by next lab: 1. (3 points) determine the equation for the output angular velocity ω2 = θ˙ 2 as a function of θ1, ω1 = θ˙ 1 and α. you must show all your work to receive credit. 2. (2 points) use the result of problem#1 to plot ω2 over 0 ≤ θ1 ≤ 360deg with ω1 = 360deg/sec. do this for α = {10,30}deg. show the results on the same plot and properly label the axes, title, legend. for this you can use matlab or ms excel. 3. (3 points) determine the equation for the output angular acceleration ω˙ 2 and create a plot similar to the one in problem#2. 4. (10 points) submit plots of the results (ω2 and ω˙ 2) obtained from creo/mechanism and compare them to results of problem#2 and problem#3. note that you should do these comparisons for the two cases with α = {10,30}deg. 5. (2 points) provide a brief explanation of the results. did they match? what are the implications as misalignment angle increases?

Consider a double atwood machine constructed as follows: a mass 4m is suspended from a string that passes over a massless pulley on frictionless bearings. the other end of this string supports a second similar pulley, over which passes a second string supporting a mass of 3m at one end and m at the other. using two suitable generalized coordinates, set up the lagrangian and use the lagrange equations to find the acceleration of the mass 4m when the system is released. explain why the top pulley rotates even though it carries equal weights on each side.

In a heat engine if 1000 j of heat enters the system and the piston does 500j of work, what is the final internal energy of the system if the inital energy was 2000 j1.write the equation2.list out your known variables 3. plug the numbers into the equations4.solve 5.write your solution statement that includes initial energy and final energy added.