An electric kitchen range has a total wall area of 1.40 m2 and is insulated with a layer of fiberglass 4.0 cm thick. the inside surface of the fiberglass has a temperature of 175 ∘c and its outside surface is at 35 ∘c. the fiberglass has a thermal conductivity of 0.040 w/(m⋅k).what is the heat current through the insulation, assuming it may be treated as a flat slab with an area of 1.40 m2? what electric-power input to the heating element is required to maintain this temperature?
Answers: 2
Physics, 21.06.2019 19:00, trinityhayes347
Fill in the blank. the number of each type of element in the compound (other than 1) is represented by a small number to the right of the element symbol.
Answers: 1
Physics, 21.06.2019 20:40, cuavang55
In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe
Answers: 3
Physics, 22.06.2019 12:10, hilljade45
Two forces produce equal torques on a door about the door hinge. the first force is applied at the midpoint of the door; the second force is applied at the doorknob. both forces are applied perpendicular to the door. which force has a greater magnitude?
Answers: 2
An electric kitchen range has a total wall area of 1.40 m2 and is insulated with a layer of fibergla...
Mathematics, 03.11.2020 09:00
Mathematics, 03.11.2020 09:00
Biology, 03.11.2020 09:00
Mathematics, 03.11.2020 09:00
Mathematics, 03.11.2020 09:00