subject
Physics, 23.01.2020 05:31 gbrightwell

A20 g ball of clay traveling east at 8.0 m/s collides and sticks together with a 10 g ball of clay traveling north at 7.5 m/s .
what is the speed of the resulting ball of clay?

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 15:00, tanaemichel
Sodium chloride, nacl, is formed when a sodium atom transfers its electron to a chlorine atom. the difference in charge between the two atoms creates a(n) attraction that bonds them together.
Answers: 1
image
Physics, 23.06.2019 00:40, bravomichelle75
Asteel tube (k=50 w/mk) of inner and outer diameter di = 20mm and do=26mm, respectively, is used to transfer heat from hot gases flowing over the tube (h-hot = 200w/m2k) to cold water flowing through the tube (h-cold = 8000 w/m2k). what is the cold-side overall heat transfer coefficient uc? to enhance heat transfer 16 straight fins of rectangular profile are installed longitudinally along the outer surface of the tube. the fins are equally spaced around the circumference of the tube, each having a thickness of 2mm and a length of 15mm. what is the corresponding overall heat transfer coefficient uc? *solve for uc in both cases*
Answers: 1
image
Physics, 23.06.2019 01:30, martinezkimberly706
Match each type of lever with the correct diagram. 1. first-class 2. third-class 3. second-class
Answers: 3
image
Physics, 23.06.2019 07:00, hockejoh000
Conventional hot-water heaters consist of a tank of water maintained at a fixed temperature. the hot water is to be used when needed. the drawback is that energy is wasted because the tank loses heat when it is not in use, and you can run out of hot water if you use too much. some utility companies are encouraging the use of on-demand water heaters (also known as flash heaters), which consist of heating units to heat the water as you use it. no water tank is involved, so no heat is wasted. a typical household shower flow rate is 2.50 gal/min (9.46 l/min ) with the tap water being heated from 51.0 ˚f (10.6 ˚c) to 120 ˚f (48.9 ˚c) by the on-demand heater. what rate of heat input (either electrical of from gas) is required to operate such a unit, assuming that all the heat goes into the water?
Answers: 3
You know the right answer?
A20 g ball of clay traveling east at 8.0 m/s collides and sticks together with a 10 g ball of clay t...

Questions in other subjects: