An object is thrown directly downward from the top of a very tall building. the speed of the object just as it is released is 17.1 m/s. after being thrown, the object falls freely due to gravity. neglect air resistance and calculate the distance, in meters which the object covers between times t1 = 3.32 s and t2 = 5.08 s after it is thrown.

Bernie drove home from a vacation in 1.5 hours. he traveled a total distance of 60 miles. what was his average speed in miles per hour? a. 60 mph b. 90 mph c. 40 mph d. 55mph

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

The coefficient of friction is a number that represents the resistance to sliding between two in contact with one another.