Which best describes what happens when light reaches opaque materials?

a) all the light pass thru

b) no light pass thru

c) some light pass thru and some reflects

d) the light is mostly absorbed and some bounces off in mant directions

Aspaceship starting from a resting position accelerates at a constant rate of 9.8 meters per second per second. how far will the spaceship travel if its final speed is 1 percent the speed of light (300,000,000 m/s)? a. 3.1 × 106 m b. 2.94 × 108 m c. 7.8 × 1010 m d. 4.6 × 1013 m

Two wooden members of 80 × 120-mm uniform rectangular cross section are joined by the simple glued scarf splice shown. knowing that β = 22° and that the maximum allowable stresses in the joint are, respectively, 400 kpa in tension (perpendicular to the splice) and 690 kpa in shear (parallel to the splice), determine the largest centric load p that can be applied using mohr's circle. (round the final answer to two decimal places.)

Which statements describe how a machine can make work easier? check all that apply. it can put out more force than the input force by decreasing the distance through which force is applied. it can increase the amount of work performed if the output force is in the same direction as the input force. it can apply a force to an object in a different direction than the force applied to the machine. it can increase the distance through which a force acts by exerting less force than was used on it. it can exert a greater force through a greater distance than the force used on the machine.