Physics, 12.12.2019 05:31 littletiger4867

A44-turn rectangular coil with length ℓ = 17.0 cm and width w = 8.10 cm is in a region with its axis initially aligned to a horizontally directed uniform magnetic field of 765 mt and set to rotate about a vertical axis with an angular speed of 64.0 rad/s.

(a) what is the maximum induced emf in the rotating coil?

(b) what is the induced emf in the rotating coil at t = 1.00 s?

(c) what is the maximum rate of change of the magnetic flux through the rotating coil?

Answers: 3

Show answers

Answers

Answer from: jordanmjdmary8571

The maximum induced emf in the rotating coil = 29.66V

The induced emf in the rotating coil when (t = 1.00 s) = 26.66V

The maximum rate of change of the magnetic flux through the rotating coil = 0.674Wb/s

Explanation:

Lets state the parameters we are being given right from the question:

Number of rectangular coil, (N) = 44

Length of Coil, l =17cm in meters we have; (l) = 17 × 10⁻² m

Width of Coil, w =8.10cm in meters we have; (w) = 8.10 × 10⁻² m

Magnitude of Uniform Magnetic Field (B) = 767mT= 765 × 10⁻³ T

Angular Speed of Coil, (ω) = 64 rad/s

(a)

To calculate the induced emf in the rotating cell,we can use the formula:

emf = NBAωsin(ωt)

For maximum induced emf, the value of sin(ωt) will be 1

emf_max = NBAω ; if (A = l × w) , we have:

emf_max = NB(l × w)ω

subsitituting the parameters into the above equation; we have:

emf_max = 44 × 765 × 10⁻³ ( 17 × 10⁻² × 8.10 × 10⁻² ) × 64

= 29.66V

(b)

At t = 1s, the induced emf is calculated as:

emf = NBAωsin(ωt)

substituting the parameters into the equation, we have:

emf = 44 × 765 × 10⁻³ ( 17 × 10⁻² × 8.10 × 10⁻² ) × 64 × sin (64 × 1)

=26.66V

(c)

To calculate the maximum rate of change of the magnetic flux through the rotating coil; we need to reflect on the equation for the maximum induced emf in terms of magnetic flux.

i.e emf_max = $N\frac{d∅}{dt}$

since emf_max = 29.66 and N = 44; we have:

29.66 = $44\frac{d∅}{dt}$

$\frac{d∅}{dt}$ = $\frac{29.66}{44}$

= 0.674 Wb/s

Answer from: Quest

The sample with the lowest specific heat capacity will have the greatest temperature increase. in this case, it would be platinum.

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge