On august 15, 2005, a spacecraft in a 190-km, 52 °-inclination circular% parking orbit around the earth departed on a mission to mars, arriving at the red planet on% march 15, 2006, whereupon retro rockets placed it into a highly elliptic orbit with a periapsis% of 300 km and a period of 35 h. determine the total delta-v required for this mission.

explanation: in any substance/object, the particles inside it (atoms/molecules) constantly move in random directions and with random speeds (this motion is called brownian motion). as a result, the particles have some kinetic energy (which is proportional to the temperature of the substance).

explanation:

have a great day!

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

are there options? cause you ain’t. real specific

answer and explanation;