subject
Physics, 09.12.2019 18:31 bo4isbad

When a diver gets into a tuck position by pulling in her arms and legs, she increases her angular speed. before she goes into the tuck position, her angular velocity is 5.5 rad/s, and she has a moment of inertia of 2.1 kg · m2. once she gets into the tuck position, her angular speed is 12.9 rad/s. determine her moment of inertia, in kg · m2, when she is in the tuck position. assume the net torque on her is zero.

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, sophiamoser
In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?
Answers: 2
image
Physics, 22.06.2019 00:00, pc103919
An inclined plane wrapped around a metal shaft is a a. lever b. screw c. pulley d. wedge
Answers: 2
image
Physics, 22.06.2019 05:30, jalexus
Thomas his older brothers, who own a junk yard, on the weekends to earn extra money. he likes to them push broken-down cars to the back of the junk yard because it makes him feel strong. last saturday, they pushed three cars with different weights, and he noticed he used different amounts of force for each one. the cars were the following weights: white car: 2,700 kg red car: 1,500 kg blue car: 2,100 kg think about how much force is needed to move each car. which correctly lists the cars in order from the most to least amount of force needed to move them? a) white, blue, red b) blue, red, white c) red, white, blue d) white, red, blue
Answers: 2
image
Physics, 22.06.2019 05:50, Dweath50
Give your knowledge of these things in your paper, you will compare and contrast analog and digital signals to determine which is more reliable for encoding and transmitting information. you’ll compare these features: signal shape numerical values for signal measurements amount of data that can be transmitted energy requirements privacy and security (ability of the signal to be encoded in a secret code) clarity of signal in the space provided, write down what you already know about any of these features. if you’re not sure, write down questions you might have about the features.
Answers: 3
You know the right answer?
When a diver gets into a tuck position by pulling in her arms and legs, she increases her angular sp...

Questions in other subjects: