subject
Physics, 29.11.2019 01:31 anayamulay

Both pulleys are fixed to the shaft and as the shaft turns with constant angular velocity, the power of pulley a is transmitted to pulley b. the bearings are in proper alignment and exerted only force reactions on the shaft. note the positive direction of each axis.

a. determine the horizontal tension(t) in the belt on the pulley b if theta=0
b. determine the x, y,z components of the reaction at the journal bearing c(cx, cy, cz)
c. determine the x, y,z components of the reaction at the thrust bearing d(dx, dy, dz)

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 03:00, emilypzamora11
If a spring has a k value of 100 newtons per meter and it is stretched 0.50 meters, what is the restoring force of the spring?
Answers: 2
image
Physics, 22.06.2019 14:20, kaylaelaine18
What are the starting materials for nuclear fission? two small nuclei two large nuclei a neutron and a large nucleus a neutron and a small nucleus
Answers: 2
image
Physics, 22.06.2019 16:40, jcblake
Beryl states that insulation with the smallest possible thermal conductivity is best to keep a house warm in winter, but worst for keeping a house cool in summer. sapphire insists the reverse is true: low thermal conductivity is good in the summer, but bad in the winter. which one, if either is correct? a. beryl, because low thermal conductivity results in low heat transfer. b. beryl, because low thermal conductivity results in high heat transfer. d. sapphire, because low thermal conductivity results in high heat transfer. e. neither, because low heat transfer is desirable both in summer and in winter.
Answers: 2
image
Physics, 22.06.2019 18:10, coryowens44
Arefrigerator uses r-134a as the working fluid and operates on the ideal vapor-compression refrigeration cycle except for the compression process. the refrigerant enters the evaporator at 120 kpa with a quality of 34 percent and leaves the compressor at 70°c. if the compressor consumes 450 w of power, determine (a) the mass flow rate of the refrigerant, (b) the condenser pressure, and (c) the cop of the refrigerator. (0.00644 kg/s, 800 kpa, 2.03)
Answers: 1
You know the right answer?
Both pulleys are fixed to the shaft and as the shaft turns with constant angular velocity, the power...

Questions in other subjects:

Konu
Mathematics, 06.01.2021 22:30
Konu
Mathematics, 06.01.2021 22:30
Konu
Mathematics, 06.01.2021 22:30