Physics, 28.11.2019 18:31 derisepicowe0fa

Derive a formula for the bullet speedvin terms ofd, t, and a measured angleθbetween the position of the hole in the first disk and that of the hole in the second. if required, useπ, not its numeric equivalent. both of the holes lie at the same radial distance from the shaft.θmeasures the angular displacement between the two holes; for instance,θ=0means that the holes are in a line andθ=πmeans that when one hole is up, the other is down. assume that the bullet must travel through the set of disks within a single revolution.

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 22:30, mooredollie

If a sphere and a cure have the same mass and are propelled up a ramp with the same force, which would travel father up the ramp? explain.

Answers: 1

continue

Physics, 22.06.2019 16:50, Walkman2092

Calculate the first and second velocities of the car with four washers attached to the pulley, using the formulas v1 = 0.25 m / t1 , and v2 = 0.25 m / (t2 – t1) where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. record these velocities, to two decimal places, in table e.

Answers: 2

continue

Physics, 22.06.2019 19:20, anaiyamills

Two kilograms of air within a piston–cylinder assembly executes a carnot power cycle with maximum and minimum temperatures of 800 k and 300 k, respectively. the heat transfer to the air during the isothermal expansion is 60 kj. at the end of the isothermal expansion the volume is 0.4 m3. assume the ideal gas model for the air. determine the thermal efficiency, the volume at the beginning of the isothermal expansion, in m3, and the work during the adiabatic expansion, in kj.

Answers: 1

continue

Physics, 23.06.2019 00:00, freespm57

Based on this activity, is kinetic energy always transformed into potential energy?

Answers: 1

continue

You know the right answer?

Derive a formula for the bullet speedvin terms ofd, t, and a measured angleθbetween the position of...