Points a and b are 1 km apart along a 15 cm diameter new steel pipe. point b is 20 m higher than point a. with a flow from a to b of 0.03 m3 /s of water, what pressure must be maintained at a if the pressure at b is 250 kpa? roughness of the steel pipe = 0.05 mm

It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc