subject
Physics, 26.11.2019 17:31 ZeroFrost7899

A0.01-kg object is initially sliding at 9.0 m/s. it goes up a ramp (increasing its elevation by 1.5 m), and then moves horizontally before striking a spring of force constant k = 100 n/m. the spring is compressed by 5.0 cm as it completely stops the object.
how much heat energy was created during this motion?

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 03:00, alexanderavrett
Standing side by side ,you and a friend step off a bridge at different times and fall for 1.6s to the water below. your friend goes first, and you follow after he has dropped a distance of 2.0m. when your friend hits the water, is the seperation between the two of you 2.0m or more than 2.0m? verify your answer with a calculation.
Answers: 2
image
Physics, 22.06.2019 23:30, codnernae2423
An electric power distributor charges residential customers $0.10 per kilowatt-hour (kwh). the company advertises that "green power" is available in 150 kwh blocks for an additional $4 per month. (green power is generated from solar, wind power, and methane sources.) if a certain customer uses an average of 391 kwh per month and commits to one monthly 150 kwh block of green power, what is her annual power bill
Answers: 1
image
Physics, 23.06.2019 00:00, hokamidat
You are a researcher for a golf club manufacturer. you are given two identical looking cubes of a metal alloy. you are informed that they are made of the exact same material, but one is crystalline, whereas the other is amorphous. it is your job to determine which one is amorphous this one is more stress-resistant and is useful in reinforcing golf clubs. which of the following is the best way to determine which is which? a. determine the density of each cube. the more dense one is the amorphous solid. b. melt both cubes and look for a broader range of melting temperatures. the one that melts over a broader range of temperatures is the amorphous solid. c. determine the density of each cube. the less dense cube is the amorphous solid. d. melt both cubes and measure the range of melting temperatures. the one that melts over a narrower range of temperatures is the amorphous solid.
Answers: 1
image
Physics, 23.06.2019 01:00, djs1671
To practice problem-solving strategy 10.1 for energy conservation problems. a sled is being held at rest on a slope that makes an angle θ with the horizontal. after the sled is released, it slides a distance d1 down the slope and then covers the distance d2 along the horizontal terrain before stopping. find the coefficient of kinetic friction μk between the sled and the ground, assuming that it is constant throughout the trip.
Answers: 1
You know the right answer?
A0.01-kg object is initially sliding at 9.0 m/s. it goes up a ramp (increasing its elevation by 1.5...

Questions in other subjects: