Physics, 18.11.2019 00:31 KingSavage5206

A1.0x10^3 kg elevator carries a maximum load of 800.0 kg. a constant frictional force of 4.0x10^3 n hinders the elevator's motion upward. what minimum power, in kilowatts, must the motor deliver to lift the fully loaded elevator at a constant speed of 3.00 m/s?

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:00, muhammadcorley123456

4. who was the first one to measure the speed of light and conclude that it is finite? 5. who was the first philosopher who thought the speed of light is finite? 13. what is the speed of light numerically? 14. give an example of something moving faster than light 15. give an example for some particles or waves that

Answers: 1

continue

Physics, 22.06.2019 10:40, rainbowboi

As you are trying to move a heavy box of mass m, you realize that it is too heavy for you to lift by yourself. there is no one around to , so you attach an ideal pulley to the box and a massless rope to the ceiling, which you wrap around the pulley. you pull up on the rope to lift the box. use g for the magnitude of the acceleration due to gravity and neglect friction forces. once you have pulled hard enough to start the box moving upward, what is the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity? express the magnitude of the force in terms of m, the mass of the box.

Answers: 1

continue

Physics, 22.06.2019 14:40, sherlinejules1

You throw a small rock straight up from the edge of a highway bridge that crosses a river. the rock passes you on its way down, 7.00 s after it was thrown. what is the speed of the rock just before it reaches the water 28.0 m below the point where the rock left your hand? ignore air resistance.

Answers: 2

continue

Physics, 22.06.2019 21:00, sportsseolive4471

Acentrifuge in a medical laboratory rotates at an angular speed of 3,700 rev/min. when switched off, it rotates through 54.0 revolutions before coming to rest. find the constant angular acceleration (in rad/s2) of the centrifuge. your response is within 10% of the correct value. this may be due to roundoff error, or you could have a mistake in your calculation. carry out all intermediate results to at least four-digit accuracy to minimize roundoff error. rad/s2

Answers: 1

continue

You know the right answer?

A1.0x10^3 kg elevator carries a maximum load of 800.0 kg. a constant frictional force of 4.0x10^3 n...