subject
Physics, 12.11.2019 05:31 brendariobranco

What horizontal force is required to drag a 15.8 kg block a long a horizontal surface with a coefficient of friction of 0.3, at a constant acceleration of 9.5 m/s

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:20, shirlsmith72
From center station, a train departs every 30 minutes on the fast line and a train departs every 50 minutes on the state line. if two trains depart from center station at 8: 00 a. m., one on each of the two lines, what is the next time that two trains, one on each line, will depart at the same time?
Answers: 1
image
Physics, 22.06.2019 01:10, Katyazamo
The 10-kg double wheel with radius of gyration of 125mm about o is connected to the spring of stiffness k = 600 n/m by a cord which is wrapped securely around the inner hub. if the wheel is released from rest on the incline with the spring stretched 225 mm, calculate the maximum velocity v of its center o during the ensuing motion. the wheel rolls without slipping
Answers: 1
image
Physics, 22.06.2019 04:30, tinytoonjr8052
Light from the sun reaches the earth in 8.3 minutes. the velocity is 3.00 x 10^8 m/s. how far is earth from the sun? i know how to get to d = (3 x 10^8 m/s)(498 sec). i just don't know how to get from there to the answer being 1.5 x 10^11 m.
Answers: 3
image
Physics, 22.06.2019 07:30, anonymous1813
Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.
Answers: 3
You know the right answer?
What horizontal force is required to drag a 15.8 kg block a long a horizontal surface with a coeffic...

Questions in other subjects: