Physics, 10.11.2019 01:31 kami23arap5p78v
Half of a 20-cm-tall beaker is filled with glycerol (density 1259 kg/m3) and the other half with olive oil (density 800 kg/m3). express your answer in newtons per square meter in terms of patm and y. express numerical coefficients to two significant figures.
Answers: 3
Physics, 22.06.2019 10:50, afonseca73
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
Physics, 22.06.2019 12:00, marquez8
You have a resistor and a capacitor of unknown values. first, you charge the capacitor and discharge it through the resistor. by monitoring the capacitor voltage on an oscilloscope, you see that the voltage decays to half its initial value in 2.70 miss . you then use the resistor and capacitor to make a low-pass filter. what is the crossover frequency fc?
Answers: 2
Physics, 22.06.2019 20:50, isarahweller103
Suppose that a mass of 2 kg is attached a spring whose spring constant is 50. the system is damped such that b = 12 . the mass is set in motion with an initial velocity of -8 m/s at a position 0 meters from equilibrium. set up and solve a differential equation that models this motion. write your solution in the form a cos ( ω t − α ) where α is a positive number. use your solution to fill in the information below: what is the amplitude of the motion? what is the value of ω ? what is the phase shift?
Answers: 1
Half of a 20-cm-tall beaker is filled with glycerol (density 1259 kg/m3) and the other half with oli...
Biology, 22.04.2020 02:04