subject
Physics, 10.11.2019 00:31 ahorseman

Very small forces can have tremendous effects on the motions of every small object. an electron, mass 9.1 x 10 ^-31 kg, exerinces a force of 1.6 x 10^-17 n in a typical electric field at the earths surface. from rest, how much time would it take for the electron to reach the speed of 3.0 x 10^6 m/s?

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 20:00, angi17e
Alice added sodium chloride to water and stirred the water for several minutes. alice is most likely trying to demonstrate that ionic compounds a. are hard. b. can dissolve. c. are clear. d. can melt.
Answers: 1
image
Physics, 22.06.2019 03:30, zahradawkins2007
As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.
Answers: 3
image
Physics, 22.06.2019 04:10, jackrider6563
Unpolarized light of intensity so passes through two sheets of polarizing material whose transmission axes make an angle of 60∘ with each other as shown in the figure. what is the intensity of the transmitted beam, st?
Answers: 3
image
Physics, 22.06.2019 19:30, rprest00
Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?
Answers: 3
You know the right answer?
Very small forces can have tremendous effects on the motions of every small object. an electron, mas...

Questions in other subjects:

Konu
English, 05.05.2020 12:26
Konu
Mathematics, 05.05.2020 12:26
Konu
Health, 05.05.2020 12:27