Answers: 3
Physics, 21.06.2019 19:00, isabellemdeakin
An object is located 30.0 cm from a concave mirror. the focal length is 15.0 c,. what is the image distance? a. 30.0 cm b. -10 cm c. 10.0 cm d. -30.0 cm
Answers: 1
Physics, 22.06.2019 00:40, naomicervero
The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.
Answers: 1
Physics, 22.06.2019 02:50, lilybear1700
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
Physics, 22.06.2019 04:50, ineedhelpplz40
Two technicians are discussing a resistance measurement between the can-h and can-l wires. technician a says this measurement should be done with the ignition switch in the "run" position. technician b states that a measurement of 0 ohms indicates an open in the network. which technician is correct?
Answers: 1
When a falling object reaches terminal speed (where the acceleration on the object is zero) what is...
English, 07.03.2021 16:30
Chemistry, 07.03.2021 16:30
Computers and Technology, 07.03.2021 16:30
History, 07.03.2021 16:30
Mathematics, 07.03.2021 16:30
Social Studies, 07.03.2021 16:30
Computers and Technology, 07.03.2021 16:30