10. a 0.25-m-wide slab of 5052-o aluminum (k=210 mpa, n=0.13) (k=210 mpa, n=0.13) is rolled from a thickness of 30 mm to a thickness of 20 mm on a cold mill with a roll diameter of 600 mm. the coefficient of friction is 0.25. calculate the maximum roll pressure and required roll force. assume the slab width is constant during the process.

Acommon technique in analysis of scientific data is normalization. the purpose of normalizing data is to eliminate irrelevant constants that can obscure the salient features of the data. the goal of this experiment is to test the hypothesis that the flux of light decreases as the square of the distance from the source. in this case, the absolute value of the voltage measured by the photometer is irrelevant; only the relative value conveys useful information. suppose that in part 2.2.2 of the experiment, students obtain a signal value of 162 mv at a distance of 4 cm and a value of 86 mv at a distance of 5.7 cm. normalize the students' data to the value obtained at 4 cm. (divide the signal value by 162.) then calculate the theoretically expected (normalized) value at 5.7 cm.