subject
Physics, 30.10.2019 20:31 cduke1919

You may have used a set of jumper cables connected to a running vehicle to start a car with a dead battery. jumper cables are a matched pair of wires, red and black, joined together along their length. suppose we have a set of jumper cables in which the two wires are separated by 1.2 cm along their 3.7 m (12 ft) length. while starting a car, the wires each carry a current of 150 a, in opposite directions. what is the force between the two wires?

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 17:30, stryjker
The ballistic pendulum was invented in 1742 by english mathematician benjamin robins. it consists of an initially stationary pendulum that moves after being struck by a bullet, and it is used to measure the original velocity of the bullet. the known variables are the bullet's mass m, the pendulum's mass m, and the height to which the block and bullet swing, determined by the length of the pendulum l and final angle θ. two principles of physics are necessary to solve for the bullet's original velocity. what are these principles? conservation of momentum and newton's third law conservation of energy and conservation of angular momentum grade summary deductions 0% potential 100% conservation of momentum and newton's second law. newton's second law and conservation of angular momentum. conservation of energy and newton's third law conservation of momentum and conservation of angular momentum. conservation of momentum and conservation of energy conservation of energy and newton's second law.
Answers: 2
image
Physics, 22.06.2019 19:40, cordovatierra16
Two charged particles, q1 and q2, are located on the x-axis, with q1 at the origin and q2 initially at x1 = 12.2 mm. in this configuration, q1 exerts a repulsive force of 2.62 µn on q2. particle q2 is then moved to x2 = 18.0 mm. what is the force (magnitude and direction) that q2 exerts on q1 at this new location? (give the magnitude in µn.)
Answers: 1
image
Physics, 22.06.2019 21:10, alexiaalfaro
The junction rule describes the conservation of which quantity? note that this rule applies only to circuits that are in a steady state.
Answers: 1
image
Physics, 23.06.2019 00:40, bravomichelle75
Asteel tube (k=50 w/mk) of inner and outer diameter di = 20mm and do=26mm, respectively, is used to transfer heat from hot gases flowing over the tube (h-hot = 200w/m2k) to cold water flowing through the tube (h-cold = 8000 w/m2k). what is the cold-side overall heat transfer coefficient uc? to enhance heat transfer 16 straight fins of rectangular profile are installed longitudinally along the outer surface of the tube. the fins are equally spaced around the circumference of the tube, each having a thickness of 2mm and a length of 15mm. what is the corresponding overall heat transfer coefficient uc? *solve for uc in both cases*
Answers: 1
You know the right answer?
You may have used a set of jumper cables connected to a running vehicle to start a car with a dead b...

Questions in other subjects: