subject
Physics, 24.10.2019 21:43 kaileyy06

The apollo lunar module was used to make the transition from the spacecraft to the moon's surface and back. consider a similar module for landing on the surface of mars. use conservation of mechanical energy to answer these questions.

(a) as the lander is descending, if the pilot decides to shut down the engine when the lander is at a height of 2.7 m, (this may not be a safe height to shut down the engine) and the velocity of the lander (relative to the surface of the planet) is 1.8 m/s what will be velocity of the lander at impact? note: g on the surface of mars is about 0.4 times that on the surface of the earth.

(b) in the case of the lunar module an impact velocity of 3.0 m/s or less was essential for a safe landing. assuming this to be the case for the mars lander as well, at what maximum height could the pilot shut down the engines to ensure a safe landing. assume the velocity v0 at the time the engine is shut down is 1.8 m/s.

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 20:30, cupcake3103670
Aball is thrown from the top of a building with an initial velocity of 21.9 m/s straight upward, at an initial height of 51.6 m above the ground. the ball just misses the edge of the roof on its way down, as shown in the figure. (a) determine the time needed for the ball to reach its maximum height. (b) determine the maximum height. (c) determine the time needed for the ball to return to the height from which it was thrown, and the velocity of the ball at that instant. (d) determine the time needed for the ball to reach the ground. (e) determine the velocity and position of the ball at t = 5.35 s.
Answers: 1
image
Physics, 23.06.2019 00:30, struckedblazing
What is the speed vfinal of the electron when it is 10.0 cm from charge 1?
Answers: 1
image
Physics, 23.06.2019 00:50, 1234fatimasm
which statements describe the image? check all that apply. the wood is releasing argon gas. this information is useful for dating ancient rock. the process works only with organic matter. the element has a half-life of 5,730 years. this shows the half-life of carbon-19.
Answers: 1
image
Physics, 23.06.2019 13:30, pearljammarow6ujs
It is necessary to determine the specific heat of an unknown object. the mass of the object is 201.0g it is determined experimentally that it takes 15j to raise the temperature 10°c. what is the specific heat of the object? 3,020,000 j/kg ∙ k 1500 j/kg ∙ k 0.00130 j/kg ∙ k 7.46 j/kg ∙ k
Answers: 3
You know the right answer?
The apollo lunar module was used to make the transition from the spacecraft to the moon's surface an...

Questions in other subjects:

Konu
Biology, 31.07.2019 19:10
Konu
Computers and Technology, 31.07.2019 19:10