subject
Physics, 24.10.2019 20:43 tangia

Aspring (k = 190 n/m) is fixed at the top of a frictionless plane inclined at angle θ = 33 °. a 1.0 kg block is projected up the plane, from an initial position that is distance d = 0.60 m from the end of the relaxed spring, with an initial kinetic energy of 27 j. (a) what is the kinetic energy of the block at the instant it has compressed the spring 0.10 m? (b) with what kinetic energy must the block be projected up the plane if it is to stop momentarily when it has compressed the spring by 0.30 m?

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, Angelo1660
Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?
Answers: 3
image
Physics, 21.06.2019 22:10, Tabithaharjo6
Which fators influence ocean currents
Answers: 1
image
Physics, 22.06.2019 08:50, babas97
The experiment was repeated many years later but the gases were mixed in a different type of container. a white solid was obtained which was xenon fluoride. predict whether you think 1) krypton and 2) radon will react with fluorine. explain reasons for your predictions
Answers: 3
image
Physics, 22.06.2019 12:50, starr3971
Air is contained in a variable-load piston-cylinder device equipped with a paddle wheel. initially, air is at 400 kpa and 17°c. the paddle wheel is now turned by an external electric motor until 75 kj/kg of work has been transferred to air. during this process, heat is transferred to maintain a constant air temperature while allowing the gas volume to triple. calculate the required amount of heat transfer in kj/kg.
Answers: 2
You know the right answer?
Aspring (k = 190 n/m) is fixed at the top of a frictionless plane inclined at angle θ = 33 °. a 1.0...

Questions in other subjects:

Konu
Mathematics, 29.12.2021 01:10