Design the mos amplifier above to obtain maximum gain while allowing for an output voltage swing of at least +- 0.5v. let vdd = 5v and utilize an overdrive voltage of approximately 0.2v a)specify the vds at the bias point b) what is the gain achieved? what is the signal amplitude vgs that results in the 0.5-v signal amplitude at the output? c)if the dc bias current in the drain is to be 100ua what value of rd is needed? d) if k'n = 200 ua/v^2 , what w/l ratio is required for the mosfet?

Aparticle moves according to a law of motion s = f(t), 0 ≤ t ≤ 12, where t is measured in seconds and s in feet. f(t) = cos(πt/6) (a) find the velocity at time t (in ft/s).

What is the thinnest soap film (excluding the case of zero thickness) that appears black when illuminated with light with a wavelength of 480 ? the index of refraction of the film is 1.34, and there is air on both sides of the film. express your answer in nanometers. hint 1. how to approach th

Click the game tab at the bottom of the simulation and select level 1. (there is no seesaw balance for this part of the activity.) balance the first equation, and click check to see if you got it right. if you can’t balance it in the first try, you can try again. work through the five equations for level 1. click continue to go on to level 2, and later level 3. each level is more difficult than the one before. keep trying until all the equations are balanced. in one or two sentences, describe how you did in the balancing game. in a few more sentences, explain one strategy you learned for balancing more complex equations.