Physics, 08.10.2019 00:10 nevaehkb

a bartender slides a beer mug at 1.50 m/s toward a customer at the end of a frictionless bar that is 1.20 m tall. the customer makes a grab for the mug and misses, and the mug sails off the end of the bar.  (a) how far away from the end of the bar does the mug hit the floor?  (b) what are the speed and direction of the mug at impact?

Answers: 1

Show answers

Answers

Answer from: brusierlover8590

a) the mug hits the floor 0.7425m away from the end of the bar. b) |V|=5.08m/s θ= -72.82°

Explanation:

In order to solve this problem, we must first start by doing a drawing of the situation. (see attached picture).

From the drawing we can see that we are dealing with a two dimensions movement problem. So in order to find out how far away from the bar the mug will fall, we need to start by finding how long it will take the mug to be in the air, so we analyze the vertical movement of the mug.

In order to find the time we need to use the following formula, which contains the data we know:

$y_{f}=y_{0}+v_{y0}t+\frac{1}{2}at^{2}$

we know that $y_{f}=0$ and that $v_{y0}=0$ as well, so the formula is simplified to:

$0=y_{0}+\frac{1}{2}at^{2}$

we can now solve this for t, so we get:

$-y_{0}=\frac{1}{2}at^{2}$

$-2y_{0}=at^{2}$

$\frac{-2y_{0}}{a}=t^{2}$

$t=\sqrt{\frac{-2y_{0}}{a}}$

we know that $y_{0}=1.20m$ and that $a=g=-9.8m/s^{2}$

the acceleration of gravity is negative because the mug is moving downwards. So we substitute them into the given formula:

$t=\sqrt{\frac{-2(1.20m)}{(-9.8m/s^{2})}}$

which yields:

t=0.495s

we can now use this to find the horizontal distance the mug travels. We know that:

$V_{x}=\frac{x}{t}$

so we can solve this for x, so we get:

$x=V_{x}t$

and we can now substitute the values we know:

x=(1.5m/s)(0.495s)

which yields:

x=0.7425m

b) Now that we know the time it takes the mug to hit the floor, we can use it to find the final velocity in the y-direction by using the following formula:

$a=\frac{v_{f}-v_{0}}{t}$

we know the initial velocity in the vertical direction is zero, so we can simplify the formula:

$a=\frac{v_{f}}{t}$

so we can solve this for the final velocity:

$V_{yf}=at$

in this case the acceleration is the same as the acceleration of gravity (which is negative) so we can substitute that and the time we found on the previous part to get:

$V_{yf}=(-9.8m/s^{2})(0.495s)$

which yields:

$V_{yf}=-4.851m/s$

so now we know the components of the final velocity, which are:

$V_{xf}=1.5m/s$ and $V_{yf]=-4.851m/s$

so now we can find the speed by determining the magnitude of the vector, like this:

$|V|=\sqrt{V_{x}^{2}+V_{y}^{2}}$

so we get:

$|V|=\sqrt{(1.5m/s)^{2}+(-4.851m/s)^{2}$

which yields:

|V|=5.08m/s

now, to find the direction of the impact, we can use the following equation:

$\theta = tan^{-1} (\frac{V_{y}}{V_{x}})$

so we get:

$\theta = tan^{-1} (\frac{-4.851m/s}{(1.5m/s)})$

which yields:

$\theta = -72.82^{o}$

a bartender slides a beer mug at 1.50 m/s toward a customer at the end of a frictionless bar that i

Answer from: Quest

total distance/total time

(85 + 82)/(5+3)

167/8

20 just over

Answer from: Quest

If your workout exceeds an hour you should substitute "a sports drink" for water.hope my answer has you : )

Other questions on the subject: Physics

Physics, 21.06.2019 23:00, 21hendlill

How are calculation for velocity and speed different

Answers: 1

continue

Physics, 22.06.2019 08:00, KA115

What is a good example of instantaneous speed

Answers: 2

continue

Physics, 22.06.2019 15:10, deidaraXneji

In the circuit, the switch s has been open for a long time and r = 125 kohm. it is then suddenly closed. (a) determine the time constant before the switch is closed. s (b) determine the time constant after the switch is closed. _ s (c) let the switch be closed at t = 0. find the current in the switch as a function of time. (use t for time. express your answer in milliamps and seconds.) i(t) =_

Answers: 3

continue

Physics, 22.06.2019 18:00, kachinafenton9098

Asynthetic fiber used in manufacturing carpet has tensile strength that is normally distributed with mean 75.5 psi and standard deviation 3.5 psi. how is the standard deviation of the sample mean changed when the sample size is increased from n equals 8 to n equals 47

Answers: 2

continue

You know the right answer?

a bartender slides a beer mug at 1.50 m/s toward a customer at the end of a frictionless bar that i...