Physics, 05.10.2019 01:10 kleshead

A5.0 cm cube of lead is held on its bottom surface
on a table, while a shearing force of 3.0 kn is
applied to the top surface. find how much the top
surface is displaced.

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 04:50, gabriellam20

Describe the function of the endomembrane system? what organelles are involved?

Answers: 3

continue

Physics, 22.06.2019 05:00, markyyy53

When does your body conduct current more readily?

Answers: 1

continue

Physics, 22.06.2019 16:50, lizzepacheco

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.

Answers: 2

continue

Physics, 22.06.2019 19:10, simmonss1185

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Answers: 2

continue

You know the right answer?

A5.0 cm cube of lead is held on its bottom surface
on a table, while a shearing force of 3.0 k...