Physics, 06.10.2019 04:01 brucewayne390

An ideal gas at a flow rate of 10 m3/min enters a compressor at 25 °c and 1 bar. it leaves at 1 mpa. during the process, heat is dissipated to the surroundings at a rate of 2100 w. the temperature of the surroundings is constant at 25 °c, and the heat capacity of the gas is given by cp(ig)/r = 2.0 +0.040t, where t is in degrees kelvin. a) assuming this process is reversible, calculate the temperature at the compressor outlet. b) calculate the minimum power required to compress the gas. c) if the compressor efficiency is 70 %, calculate the actual power needed. d) calculate the actual final temperature at the compressor outlet.

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 04:30, loloi83

Acrow drops a 0.11kg clam onto a rocky beach from a height of 9.8m. what is the kinetic energy of the clam when it is 5.0m above the ground? what is its speed at that point?

Answers: 1

continue

Physics, 22.06.2019 14:10, astarkey14

Click the game tab at the bottom of the simulation and select level 1. (there is no seesaw balance for this part of the activity.) balance the first equation, and click check to see if you got it right. if you can’t balance it in the first try, you can try again. work through the five equations for level 1. click continue to go on to level 2, and later level 3. each level is more difficult than the one before. keep trying until all the equations are balanced. in one or two sentences, describe how you did in the balancing game. in a few more sentences, explain one strategy you learned for balancing more complex equations.

Answers: 2

continue

Physics, 22.06.2019 14:30, 21schraderlily

Will mark as brainliest how does a catapult increase the trajectory of an object? ps. answer as if u were a 5th grader

Answers: 1

continue

Physics, 22.06.2019 15:10, maudiejane

An important dimensionless parameter concerned with very high-speed flow is the mach number, defined as v/c, where v is the speed of the object such as an airplane or projectile, and c is the speed of sound in the fluid surrounding the object. for a projectile traveling at 1170 mph through air at 50 ˚f and standard atmospheric pressure, what is the value of the mach number?

Answers: 2

continue

You know the right answer?

An ideal gas at a flow rate of 10 m3/min enters a compressor at 25 °c and 1 bar. it leaves at 1 mpa....