subject
Physics, 01.10.2019 16:20 lexiships

Acar is moving in the positive direction along a straight highway and accelerates at a constant rate while going from point a to point b. if the acceleration is positive, increasing the speed of the car, when does the position where the average speed equals the instantaneous speed occur during the time interval from a to b? assume the time interval is t.

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 14:10, Lianabel0517
Ok i am attempting to my niece attach a galvanized wire (like a tether for a dog) at the corner of two fences, making a tightwire if you will and we drilled a hole in a softball and she hits it. the ? and problem is that we can not get the wire taunt enough where it doesnt sag after hitting the ball once, and the wire sags and wobbbles. its a 15 ft rubber covered galvanized wire and one can adjust the length of the placing of the wire by having it make the corner of 2 fences become a it can be adjusted, however, with all our human strength and pliers we could not make it taunt as possible. is there anything other that attaching it to a car to do this. sorry abt the length but it would mean the world to my niece if i could solve this came up with the entire idea herself, and she is 14 and paid for the wire and did as much work as i did drilling a hole through a softball wide enough for attaching piece at each end of the wire that clips on to the fence. . any ideas welcome if serious. but awesome if it is a fact. much obliged. bucky bukowski buckman
Answers: 3
image
Physics, 22.06.2019 02:50, antcobra
20. threshold braking in the vehicle's braking system occurs when a. the brake pedal is pushed, heel on floorboard, with full foot pressure. b. the brakes are exerting full braking power, without traction loss. c. the driver begins pushing down the brake pedal, with moderate slowdown. d. the brakes just begin to take hold with a gradual slowdown.
Answers: 3
image
Physics, 22.06.2019 05:00, caguil00
Does work output exceed work input when a machine is used? a) yes, it does, as machines create energy. b) it depends on the type of machine used. c) no, it doesn’t, as machines are inefficient. d) no, it doesn’t, as machines cannot create energy.
Answers: 1
image
Physics, 23.06.2019 06:30, IkarosSakurai
Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?
Answers: 2
You know the right answer?
Acar is moving in the positive direction along a straight highway and accelerates at a constant rate...

Questions in other subjects: