subject
Physics, 30.09.2019 19:20 Geo777

The pressure of water is increased from 100 kpa to 900 kpa by a pump. the temperature of water also increases by 0.15°c. the density of water is 1 kg/l and its specific heat is cp = 4.18 kj/kg⋅°c. the enthalpy change of the water during this process is kj/kg. solve this problem using appropriate software.

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:30, leannamat2106
According to the tide table below what time of day will the highest tide occur?
Answers: 1
image
Physics, 22.06.2019 02:50, lilybear1700
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
image
Physics, 22.06.2019 09:30, lisnel
1. how to locate the image in converging(concave) mirror and diverging (convex) mirror with salt. 2. how to locate the image in a converging (convex) lens and diverging (concave) lens with salt.
Answers: 1
image
Physics, 22.06.2019 11:30, emilyplays474
In a good thermo flask the main cause of heat loss is
Answers: 1
You know the right answer?
The pressure of water is increased from 100 kpa to 900 kpa by a pump. the temperature of water also...

Questions in other subjects:

Konu
Biology, 21.09.2021 14:10
Konu
Mathematics, 21.09.2021 14:10