Physics, 27.09.2019 20:00 toxsicity

What are the characteristics of the radiation emitted by a blackbody? according to wien's law, how many times hotter is an object whose blackbody emission spectrum peaks in the blue, at a wave length of 450 nm, than a object whose spectrum peaks in the red, at 700 nm? show me your calculations.

Answers: 2

Show answers

Answers

Answer from: PlzNoToxicBan

a) What are the characteristics of the radiation emitted by a blackbody?

The total emitted energy per unit of time and per unit of area depends in its temperature (Stefan-Boltzmann law).

The peak of emission for the spectrum will be displaced to shorter wavelengths as the temperature increase (Wien’s displacement law).

The spectral density energy is related with the temperature and the wavelength (Planck’s law).

b) According to Wien's Law, how many times hotter is an object whose blackbody emission spectrum peaks in the blue, at a wave length of 450 nm, than a object whose spectrum peaks in the red, at 700 nm?

The object with the blackbody emission spectrum peak in the blue is 1.55 times hotter than the object with the blackbody emission spectrum peak in the red.

Explanation:

A blackbody is an ideal body that absorbs all the thermal radiation that hits its surface, thus becoming an excellent emitter, as these bodies express themselves without light radiation, and therefore they look black.

The radiation of a blackbody depends only on its temperature, thus being independent of its shape, material and internal constitution.

If it is study the behavior of the total energy emitted from a blackbody at different temperatures, it can be seen how as the temperature increases the energy will also increase, this energy emitted by the blackbody is known as spectral radiance and the result of the behavior described previously is Stefan's law:

$E = \sigma T^{4}$ (1)

Where $\sigma$ is the Stefan-Boltzmann constant and T is the temperature.

The Wien’s displacement law establish how the peak of emission of the spectrum will be displace to shorter wavelengths as the temperature increase (inversely proportional):

$\lambda max = \frac{2.898x10^{-3} m. K}{T}$ (2)

Planck’s law relate the temperature with the spectral energy density (shape) of the spectrum:

$E_{\lambda} = {{8 \pi h c}\over{{\lambda}^5}{(e^{({hc}/{\lambda \kappa T})}-1)}}}$ (3)

b) According to Wien's Law, how many times hotter is an object whose blackbody emission spectrum peaks in the blue, at a wavelength of 450 nm, than a object whose spectrum peaks in the red, at 700 nm?

It is need it to known the temperature of both objects before doing the comparison. That can be done by means of the Wien’s displacement law.

Equation (2) can be rewrite in terms of T:

$T = \frac{2.898x10^{-3} m. K}{\lambda max}$ (4)

Case for the object with the blackbody emission spectrum peak in the blue:

Before replacing all the values in equation (4), $\lambda max$ (450 nm) will be express in meters:

$450 nm . \frac{1m}{1x10^{9} nm}$ ⇒ $4.5x10^{-7}m$

$T = \frac{2.898x10^{-3} m. K}{4.5x10^{-7}m}$

T = 6440 K

Case for the object with the blackbody emission spectrum peak in the red:

Following the same approach above:

$700 nm . \frac{1m}{1x10^{9} nm}$ ⇒ $7x10^{-7}m$

$T = \frac{2.898x10^{-3} m. K}{7x10^{-7}m}$

T = 4140 K

Comparison:

$\frac{6440 K}{4140 K} = 1.55$

The object with the blackbody emission spectrum peak in the blue is 1.55 times hotter than the object with the blackbody emission spectrum peak in the red.

Answer from: Quest

Friction is the force that act and opposes all motion of moving objects

Answer from: Quest

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm. the wire diameter is d = 0.9 mm. the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2) in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: