Physics, 06.09.2019 04:10 angelica3752

what factors differentiate tropical wet climates from other climate regions?

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 13:30, brsglover8355

6–43 a food department is kept at 2128c by a refrigerator in an environment at 308c. the total heat gain to the food department is estimated to be 3300 kj/h and the heat rejection in the condenser is 4800 kj/h. determine the power input to the compressor, in kw and the cop of the refrigerator.

Answers: 2

continue

Physics, 22.06.2019 17:20, Tiredd7838

The magnitude of the magnetic field at a certain distance from a long, straight conductor is represented by b. what is the magnitude of the magnetic field at twice the distance from the conductor? a. at twice the distance, the magnitude of the field is 4b. b. at twice the distance, the magnitude of the field is 2b. c. at twice the distance, the magnitude of the field is b/2.d. at twice the distance, the magnitude of the field is b/4.e. at twice the distance, the magnitude of the field remains equal to b.

Answers: 3

continue

Physics, 23.06.2019 08:00, Tyrant4life

Which of the following is a false statement about dispersion forces? view available hint(s) which of the following is a false statement about dispersion forces? dispersion forces are the result of fluctuations in the electron distribution within molecules or atoms. dispersion forces are present in all atoms and molecules. dispersion forces result from the formation of instantaneous dipoles in a molecule or atom. dispersion forces always have a greater magnitude in molecules with a greater molar mass. dispersion force magnitude depends on the amount of surface area available for interactions.

Answers: 1

continue

Physics, 23.06.2019 08:30, 01222002

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28