Physics, 29.08.2019 22:10 josh200508

Aflywheel with a very low friction bearing takes 1.6 h to stopafter the motor power
is turned off. the flywheel was originally rotating at 41 rpm. whatwas the initial rotation rate in radians per second? answer in units of rad/s. how many revolutions does the flywheel make before it stops? answer in units of rev.

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 15:10, lilisncz

Four objects are being tested to see how they are affected by fluid friction. object w has a surface area of 4.5 cm2, object x has a surface area of 2.5 cm2, object y has a surface area of 6.2 cm2, and object z has a surface area of 3 cm2. which object would experience the most fluid friction?

Answers: 3

continue

Physics, 21.06.2019 16:00, huangjianhe135

28. a stone is projected at a cliff of height h with an initial speed of 42.0 mls directed at angle θ0 = 60.0° above the horizontal. the stone strikes at a, 5.50 s after launching. find (a) the height h of the cliff, (b) the speed of the stone just before impact at a, and (c) the maximum height h reached above the grou

Answers: 1

continue

Physics, 22.06.2019 06:00, 10033636

Which of the following changes will result in a stronger electromagnet? a. using fewer coils of wire b. using a higher voltage c. using a shorter nail d. using a longer wire

Answers: 1

continue

Physics, 22.06.2019 09:30, gobbler80

On a day when the barometer reads 75.23 cm, a reaction vessel holds 250 ml of ideal gas at 20 celsius. an oil manometer ( ρ= 810 kg/m^3) reads the pressure in the vessel to be 41 cm of oil and below atmospheric pressure. what volume will the gas occupy under s. t.p.?

Answers: 2

continue

You know the right answer?

Aflywheel with a very low friction bearing takes 1.6 h to stopafter the motor power
is turned...