Acylindrical rod of copper (e = 110 gpa, 16 × 106 psi) having a yield strength of 240 mpa (35,000 psi) is to be subjected to a load of 6640 n (1493 lbf). if the length of the rod is 380 mm (14.96 what must be the diameter to allow an elongation of 0.50 mm (0.01969

What is the function of the commutator in a dc motor? a. to spin the magnet b. to change direct current into alternating current c. to change alternating current into direct current d. to spin the wire coil

How are momentum and impulse related? impulse is a whim to do something, while momentum keeps it going impulse is another name fore instantaneous momentum the impulse acting on and object is equal to the change of momentum it causes. the impulse that acts on and object is the momentum that results.

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.