Asolenoid is made from a copper wire that is 15 m long and has a radius of 1.6 mm. the resistivity of copper is 1.68 x 10-8 ωm. to form the solenoid, the copper wire is tightly wrapped around a tube that is 0.35 m long and has a diameter of 2.5 cm. the solenoid is connected to a power source which supplies an emf of 2.5 v. find the magnitude of the magnetic field through the center of this solenoid.

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Calculate the capacitance of a system that stores 2.0 x 10^-10c of charge at 100.0 v. use c=q/v. a. 2.0 x 10^-12 f b. 2.0 x 10^-8 f c. 5.0 x 10^11 f d. 5.0 x 10^7 f

How to tell if a molecule is polar or nonpolar with electronegativity