Physics, 24.07.2019 20:30 pi667422

Determine (a) the principal stresses and (b) the maximum in-plane shear stress/average normal stress that are developed at point a. draw the ‘little red squares’ for both situations. use mohr’s circle(s) only.

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 09:00, winterblanco

The pressure proportional to the area a- inversely b- directly c- increase d-decrease

Answers: 2

continue

Physics, 22.06.2019 15:30, tiffuuu

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

continue

Physics, 23.06.2019 02:50, neshaj

Adielectric-filled parallel-plate capacitor has plate area a = 30.0 cm2 , plate separation d = 9.00 mm and dielectric constant k = 3.00. the capacitor is connected to a battery that creates a constant voltage v = 15.0 v . throughout the problem, use ϵ0 = 8.85x10-12 c2/n. m2 . find the energy u1 of the dielectric-filled capacitor.

Answers: 2

continue

Physics, 23.06.2019 05:00, nsuleban9524

How long will it take a car traveling of a constant speed of 45m/s to cover the distance of a 2.5km?

Answers: 1

continue

You know the right answer?

Determine (a) the principal stresses and (b) the maximum in-plane shear stress/average normal stress...